First, the filled container, with the cap lying loosely on the finish, is manually placed on the table. Then the container is clamped against the guides with the toggle clamp. A magnet is lowered by pressing down on the knob at the top of the machine. The magnet picks up the cap and raises it up into the head steam zone. The table is raised by means of a cam and handle located on the front of the machine. The container is raised up to the head and into contact with the cap. The rotating rubber chuck applies and tightens the cap. (Note: Torque can be adjusted by the head load springs.) A push cap can be applied if the motor is not utilized. Finally, the table is lowered and the capper container is removed.

FEATURES

• Applies continuous thread, lug caps, & push-on caps
• Compact, free-standing unit
• Self-contained motorized unit
• Convenient bench mount
• Flexible hose provided for steam
• Small enough for laboratory use
• Can plug in any 110V outlet
• Convenient for capping small quantities of product

AVAILABLE ACCESSORIES

• 10-15 Containers per minute (Depending on speed of operator)
• 1.00”-6.25” Diameter Container
• 2.00”-10.50” Tall Container
• 47mm – 83mm Cap Size
• 100PSI Steam Pressure line required